H3C S3100-52P Command Manual page 10

Command Manual – Routing Protocol
H3C S3100-52P Ethernet Switches
Example
# Display the verbose routing table information.
<H3C> display ip routing-table verbose
Routing Tables:
+ = Active Route, - = Last Active, # = Both
Destinations: 3
Holddown: 0
**Destination: 1.1.1.0
**Destination: 1.1.1.1
**Destination: 2.2.2.0
First, display statistics of the whole routing table. Then, output detailed information of
every route entry in turn. Table 1-2shows the meaning of route status. Table 1-4 shows
routing table statistics.
Table 1-4 Description on the fields of the display ip routing-table verbose command
Holddown
Delete
Hidden
Routes: 3
Delete: 62
Protocol: #DIRECT
*NextHop: 1.1.1.1
State: <Int ActiveU Retain Unicast>
Age: 20:17:41 Cost: 0/0
Protocol: #DIRECT
*NextHop: 127.0.0.1
State: <NoAdvise Int ActiveU Retain Gateway Unicast>
Age: 20:17:42 Cost: 0/0
Protocol: #DIRECT
*NextHop: 2.2.2.1
State: <Int ActiveU Retain Unicast>
Age: 20:08:05 Cost: 0/0
Field
Chapter 1 IP Routing Table Display Commands
Hidden: 0
Mask: 255.255.255.0
Preference: 0
Interface: 1.1.1.1(Vlan-interface1)
Mask: 255.255.255.255
Preference: 0
Interface: 127.0.0.1(InLoopBack0)
Mask: 255.255.255.0
Preference: 0
Interface: 2.2.2.1(Vlan-interface2)
Number of held-down routes
Number of deleted routes
Number of hidden routes
1-9
* = Next hop in use
Description