Acura RLX Sport Hybrid 2020 Owner's Manual page 40

® ®
BLUETOOTH HANDSFREELINK
®
BLUETOOTH HANDSFREELINK
Learn how to operate the vehicle's hands-free calling system.
Basic HFL Operation
Make and receive phone calls using the vehicle's audio system, without
handling your phone. Visit handsfreelink.com to check phone compatibility.
Canada customers can phone (855) 490-7351 for any HandsFreeLink
inquiry.
To reduce the potential for driver distraction, certain manual functions may
be inoperable or grayed out while the vehicle is moving. Voice commands
are always available.
n HFL Displays and Controls
Use the controls to enter information and make selections.
Pick-up button: Press to go to the Speed Dial/Call History on the
multi-information display or to answer an incoming
call.
Hang-up/back Press to end a call, to cancel a command or to clear
button: the phone information on the multi-information
display.
Talk button: Press to give HFL voice commands.
PHONE button: Press to go directly to the Phone screen.
Interface dial: Select an item on the screen, then select secondary
menu.
72 |
®
n
®
related
Pairing a Phone
To use hands-free phone and streaming audio functions, you must first pair
your phone to the system. This can only be done when the vehicle is stopped.
n
Talk Button Tips
When using the Talk button, wait for the beep before saying a command.
The system recognizes commands listed in the Voice Command Index.
• Aim the vents away from the ceiling and close the windows, as noise
coming from them may interfere with the microphone.
• Press and release the talk button when you want to call a number. Speak
clearly and naturally after a beep.
• If the microphone picks up voices other than yours, the command may
be misinterpreted.
• To change the volume level, use the audio system's volume knob or the
*1
remote audio controls on the steering wheel.
Pairing the First Phone
1. Press the Phone button to go to
the Phone screen. A prompt
appears. Select Yes.
2. Make sure your phone is in
discovery mode. Select OK.
3. The system searches for your
phone. Select your phone when it
appears on the list.
4. If your phone does not appear:
If your phone does not appear, you
can select Refresh to search again.
If your phone still does not appear,
Select Phone Not Found? and
®
search for HandsFreeLink from
your phone. Connect to HFL.
5. The system gives you a pairing
code. Compare it to the code that
appears on your phone. Connect to
HFL from your phone. You will
receive a notification on the screen
if pairing is successful.
® ®
BLUETOOTH HANDSFREELINK
*1 - If equipped
| 73