Acura RLX Sport Hybrid 2020 Owner's Manual page 26

VEHICLE CONTROLS
• Your vehicle speed is 25 mph (40 km/h) or more.
• There are no preceding or oncoming vehicle with headlights or taillights
turned on.
• There are few street lights on the road ahead.
Switching to low beam
One of the following conditions must be met before the low beams turn
on.
• Your vehicle speed is 15 mph (24 km/h) or less.
• There is a preceding or oncoming vehicle with headlights or taillights
turned on.
• There are many street lights on the road ahead.
Manually switching between high beam and low beam
n
Using the Pull the lever toward you for flashing the high beams then
lever: release it within about one second while driving.
To reactivate, pull the lever toward you for flashing the high
beams then release it while driving. The auto high beam
indicator will come on.
Using the Turn the light switch to
light To reactivate, turn the light switch to AUTO when the lever
switch: is in the low beam position, the auto high beam indicator will
come on.
Turning the System On or Off
n
Make sure the headlight lever is in the
low beam position with the switch
rotated to the AUTO position. The
auto high beam system indicator
comes on.
To turn the system Pull and hold the headlight lever toward you for
on: about 30 seconds, until the indicator flashes once.
To turn the system Pull and hold the headlight lever toward you for
off: about 40 seconds, until the indicator flashes twice.
44 |
.
Wiper Operation
The windshield wipers and washers can be used when the vehicle is on.
Front Wipers
n
Move the wiper lever up or down to the desired position.
n Headlight Integration with Wipers
When the headlights are in the AUTO position, they automatically turn on
when the front wipers operate several times within a certain interval. The
headlights turn off shortly after the wipers are turned off or if there is
enough ambient light.
Automatic Intermittent Wipers
n
When you move the lever to the AUTO
position while driving in rainy weather,
the wipers operate based on the
amount of detected rainfall.
Rotate the adjustment ring to adjust
the rainfall sensor sensitivity. Set the
wipers to OFF when the rain stops.
Ensure the wiper lever is in the OFF position before entering a car wash or
cleaning the windshield. Wiper-system damage may happen otherwise.
VEHICLE CONTROLS
*1
*1 - If equipped
| 45