Domain Default - H3C S5510 Series Command Manual

Command Manual – AAA&RADIUS&HWTACACS
H3C S3610&S5510 Series Ethernet Switches
undo domain isp-name
View
System view
Parameter
isp-name: Name of a ISP domain, a character string of 1 to than 24 characters
(case-insensitive). This string cannot contain the following characters: /:*?<>@.
default: Manually configures the default ISP domain, which is "system" by default.
There is one and only one default ISP domain.
disable: Disables the configured default ISP domain.
enable: Enables the configured default ISP domain.
Description
Use the domain command to create an ISP domain and enter its view, or enter the view
of an existing ISP domain, or configure the default ISP domain.
Use the undo domain command to delete a specified ISP domain.
After you execute the domain command, the system creates an ISP domain if the
specified ISP domain does not exist. Once an ISP domain is created, it is in the active
state.
Related command: state, display domain.
Example
# Create a new ISP domain "aabbcc.net" and enter its view.
<Sysname> system-view
[Sysname] domain aabbcc.net
[Sysname-isp-aabbcc.net]

1.1.19 domain default

Syntax
domain default { disable | enable isp-name }
View
System view
Parameter
disable: Disables the specified ISP domain from being configured as the default.
enable: Configures the specified ISP domain as the default.
isp-name: ISP domain name.
Chapter 1 AAA & RADIUS & HWTACACS
1-21
Configuration Commands