Mazda CX-9 2007 Service Highlights page 499

Hide thumbs Also See for CX-9 2007:

Table of Contents

One-touch Wiper Operation

1. When the windshield wiper lever is pulled up, the one-touch switch is on and the current flows, causing the

windshield wiper motor to operate at low speed.

2. The windshield wipers operate at low speed while the windshield wiper lever is pulled up. When the windshield

wiper lever is released, the wipers stop in the park position due to the autostop operation.

Intermittent Wiper Operation

1. When the wiper switch moves to the INT position, the intermittent wiper (INT) relay turns on, and current flows

through the INT relay to the wiper switch, wiper motor, then to ground. The wipers operate at low speed.

2. When the preset period of time has passed, the INT relay turns off. The current stops flowing through the wiper

motor. The autostop function activates, and the wipers stop at the park position. Cycling through this sequence

of operations, the wipers operate at specified intervals.

3. The windshield wipers operation timing (INT relay OFF to ON) during intermittent operation can be set freely

using the INT volume switch.

WIPER/WASHER SYSTEM

WINDSHIELD WIPER

WINDSHIELD WIPER

acxuun00000409

acxuun00000410

Chapters

Table of Contents