Motorola MBP668CONNECT User Manual page 16

4.6 Camera Control
4.6.1 Add (pair) a camera
M
1. Press the button and the menu bar will pop up.
<
2. Press the LEFT button or
del/add/view/scan
the
+
3. Press the UP button or
O
button to confirm.
cam*1 cam 2 cam 3
4. / /
DOWN button to select the desired CAM, and press the
start searching for a camera unit. The green audio level LED will flash
rapidly while searching.
5. Press and hold the PAIR button on the side of baby unit until the parent
unit finds the camera, beeps and the picture from the camera appears.
NOTE
A camera can only be registered to one parent unit at any one time.
4.6.2 View a camera
M
1. Press the button and the menu bar will pop up.
<
2. Press the LEFT button or
del/add/view/scan
the
+
3. Press the UP button or
O
button to confirm.
cam*1 cam*2
4. / /
DOWN button to select desired CAM, and press the
the picture from that camera.
TIP
Quick Method to View Cameras instead of entering into the menu bar.
O
Directly press
4.6.3 View multi-cameras on screen
M
1. Press the button and the menu bar will pop up.
<
2. Press the LEFT button or
+
3. Press the UP button or
16
>
menu will pop up.
-
DOWN button to select
cam 4
/ will pop up, press the
>
menu pops up.
-
DOWN button to select
cam 3 cam 4
/ will pop up, press the
repeatedly to select
>
-
DOWN button to select 4-split screen On/Off.
RIGHT button until
+
RIGHT button until
+
cam*1 cam*2
/ /
RIGHT button until
is highlighted, and
add
, and press the
-
UP button or
O
button to
is highlighted and
view
, and press the
-
UP button or
O
button to view
cam 3 cam 4
/ .
icon is highlighted.
Parent Unit Menu Options