Motorola MBP668CONNECT User Manual page 13

When charging
1. During power OFF, when adapter is plugged in, a adapter logo will display
on screen and then a flashing battery logo will display for 45 sec. The Blue
LED at top left corner light up indicates adapter is plugged in.
2. During power ON, when adapter is plugged in, the battery icon on screen's
top right corner will show that the battery is charging. The Blue LED at the
top left corner light up indicates adapter is plugged in.
2.4 Registration (Pairing)
The Baby monitor is pre-registered to your Parent Unit. You do not need to
register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the procedure
below:
M
1. Press the button of the parent unit and the menu bar will pop up.
<
2. Press the LEFT button or
del/add/view/scan
the
+
3. Press the UP button or
O
button to confirm.
cam* 1 cam 2
4. / /
DOWN button to select the desired CAM and press the
start searching for a camera unit. The green audio level LED will flash
rapidly while searching.
O
5. Press the
6. Press and hold the PAIR button on the side of baby unit until the parent
unit finds the camera, beeps and the video from the camera appears.
NOTE
If a particular Baby Unit was registered previously, registering this current
Baby Unit again will overwrite the old registration.
Getting Started
>
menu will pop up.
-
DOWN button to select
cam 3 cam 4
/ will pop up, press the
button to confirm.
RIGHT button until
+
is highlighted, and
Add
, and press the
-
UP button or
O
button to
13