Page 1
User Manual Color Video Door Phone CMV-70M / CMV-70MD Thank you for purchasing COMMAX products. • Thank you for purchasing COMMAX products. Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow • Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow instructions to use a product exactly.
Warning Please plug out the power Please don’t use several Please don’ t bend the power Please don’ t handle the power cable from the socket when products at the same time on cable excessively or it may cable with a wet hand. not using it for a long period one power socket.
4. Installation Note Avoid installing the product in • the area of direct sunlight. The position of the unit's body should • fit the standard height range (Recommended height range is 1450 ~ 1500mm.) Avoid installing the product exposed to •...
6. Operation Functions for single & MODUM system Use for single system 6-1-1 1) Communicate with visitor (1) Communicate in Monitor ① As the paging button on a door camera is pressed, the paging tone rings at the connected videophone and the visitor’s figure appears on the monitor. ②...
Page 6
Use for MODUM system 6-1-2 - This function is only for MODUM system. - If the MODUM system is connected, it is automatically recognized when it boot. Please reboot the power after installation for stable operation. 1) Communicate with visitor (1) Paging from a common entrance ①...
Page 7
3) Monitoring (Individual entrance / Common entrance / CCTV) - The following menu will be appeared on the right-lower corner when press the “Monitoring” button in standby mode. - Press “Monitoring” button to monitor the individual entrance when OSD menu displays on screen.
Page 8
(1) When 1 unit of CMD-104VU is installed, : Ports number 1 to 4 will be shown on screen and press each port number that will be displayed on the screen. : Port number that is displayed on the screen depends on the setting of DIP S/W of CMD- 104VU.
4) Page the elevator - If the elevator is connected with monitor, you can use this function. - In the standby mode, if you press the “Guard & Interphone” button, the additional menu will be displayed at the lower-right corner of screen. - For paging elevator, press the door release button while the menu is displayed.
Page 10
- OSD will be changed as below when select any menu. DOOR VIDEO SET (Control the display) 1) BRIGHTNESS : select 0~20, defaults 10 2) CONTRAST : select 0~20, defaults 10 3) COLOR : select 0~20, defaults 10 - Settings for Brightness / Contrast / Color (1) Use “Move”...
CMV-70M / CMV-70MD Camera 4-wire (Polarity, CAM2 will be convertible with W irin g ty pe MODUM system) Inperphone 4-wire (Polarity) Power Source CMV-70M : 100-240V,50/60Hz(FREE VOLTAGE) CMV-70MD : 24 Stand by : 4 W Max : 15 W Power Consumption...
Page 12
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133 Web site : www.commax.com PM5470S00010 Printed In Korea / 2015.03.104...
Need help?
Do you have a question about the CMV-70M and is the answer not in the manual?
Questions and answers