6.
Pressing the "+" or "-" button, to select the setting number. Then press the "ENTER" button.
Setting number
Example: Function number 30
Setting number 01
Error
Good
・When the data was not set up on the indoor unit
・When the data was normally set up on the indoor unit.
(" --" is displayed.)
・Set up the data again.
Pressing the "ENTER" button to return to the address selection screen.
If setting has been completed, pressing the "MENU" button to return to the Menu 2 item selec-
tion screen.
- 42 -
12-2. Function settings by using remote controller
12. Function settings