Fujitsu ARYG72LHTA Design & Technical Manual page 43

 Resetting the manual address setting number
1. To activate the address setting mode, hold down the three buttons of "MENU", "<", and "EN-
TER" at the same time for 2 seconds or longer. Menu 2 setting screen is displayed.
2. Select the "14" in Menu 2 settings. Then press the "ENTER" button.
3. To reset address, select "1: Reset" with the "+" or "-" buttons. If not resetting, press the "MENU"
button to the Menu 2 item selection screen.
Press the "ENTER" button to return to the Menu 2 item selection screen.
12-2. Function settings by using remote controller
" is displayed:
"
Address automatically
allocated
Not displayed:
Address manually
allocated
: Not reset
: Reset
- 39 -
12. Function settings