Bernina 700 Manual page 106

Attachment
Message on the display
The automatic thread cutter (at
the thread catcher) needs
cleaning.
It is time for the regular
maintenance. Please contact your
specialzed BERNINA dealer to
make an appointment.
106
Cause
The machine needs cleaning/
lubricating.
The automatic thread cutter
needs cleaning. The message
appears every time when the
machine is started as soon as
1000 cutting cycles have been
carried out.
The machine needs maintenance.
The message appears after the
programmed service interval has
expired.
Important information: Having
your machine cleaned and
serviced properly at the
appropriate times ensures its
proper functioning and a long
service life. Ignoring the terms
can affect the operating life and
restrict the guaranteeing. The
cost allocation for maintencance
work is regulated nationally.
Consult your spezialised dealer or
your servicing shop for more
details.
Repair
> Clean the machine.
> Lubricate the machine.
Important information on lubricating:
> Too much oil can pollute the fabric and the thread.
> After lubricating, always embroider on a test piece.
> Touch the icon «Confirm».
– The machine calls up the function «Clean the thread
catcher».
> Clean the thread catcher according to the instructions
on the display.
– The counter for the cutting cycles is reset.
> Contact the specialized BERNINA dealer.
> Delete the message temporarily by touching the icon
«ESC».
Having cleared the message three times, the message will
appear as recently as the next service interval has been
completed.