Mercury MercMonitor Manual page 21

UNIVERSAL FAULT CODES DISPLAYED
1. When universal fault codes are enabled and a problem is detected, the
"AL" alarm will flash on the display and a pop‑up window displays the
system where the fault is located and the universal fault code.
3152 - 16
[ EXIT ] [ NEXT ]
2. Press the "+" button to view the next alarm.
3. Press the "–" button to exit the alarm screen.
EMISSION CONTROL ALARM WARNINGS
1. The screen displays the fault location and a description of the faulty
component. Press the "+" button for more information.
a
<Engine Sensor>
[EXIT]
a - Fault location
b - Component
eng
GENERAL INFORMATION
!
Alarms
AL
STBD
MODE
!
Alarms
AL
STBD
[MORE]
MODE
a -
b -
a
b
58123
b
58097
15
Fault location
Universal fault code