Mercury MercMonitor Manual page 23

•
"Favorites" are specific screens selected by the operator to be reviewed
quickly. The favorites will remain on the screen for a specific amount of
time. This time can be one second up to 30 seconds or turned "OFF" to
advance manually through the screens. A total of nine screens can be
selected from the "Propulsion" menu, "Vessel" menu, or "Full Screens"
menu. Press and hold the "–" and "+" buttons down at the same time for
three to five seconds to add the screen to the favorites menu.
•
"Alarms" displays information on the location, identifies, and advises a
corrective action to take for all warning alarms. If available, while in the
"Alarms" category, press the "+" button for more detailed descriptive text
about the fault. Press the "+" button again to review the recommended
corrective action to take. Press the "MODE" button to review the next
fault, or press the "–" button to exit the "Alarms" screen.
• "Settings" allows the user to turn on and off screens, select a type of
measurement (knots, kilometers, miles), select a screen color, adjust the
contrast and brightness of the screen, select a digital or analog clock
display, adjust and correct various different sensor parameters (tanks,
trim, tabs), activate a GPS interface with the gauge, give the gauge a
specific name (up to 14 characters), enable universal fault codes, and
reset the gauge to the factory default settings.
eng
GENERAL INFORMATION
17