JabloCom EYE-02 Application Note page 7

WATCH mode)
Panic alarm
(external detector generated
Panic alarm)
Fire alarm
(external detector generated
Fire alarm)
Alarm
(detector generated Alarm)
Wake-up
(camera was woken up)
AC fault
(AC power failed)
Light ON
(camera infrared illumination
was turned ON)
Camera switches can be configured and controlled in JabloTool via internet (www.jablotool.com, tab Peripherals), or via USB
cable (tab Configuration, External devices). Switches can also be controlled by SMS commands if they are set to SMS
ON/OFF or SMS ON/OFF (pulse) mode.
Example of SMS command: "<Remote Access Password> DeviceX ON" will switch the DeviceX ON)
Example of SMS command: "<Remote Access Password> DeviceX ON 02:00:00" will switch the DeviceX ON for 2 hours.
Switches are called Devices in SMS commands. For more information on SMS commands see the camera manual.
EYE-02.ENG.MAN.APN.Wireless_peripherals.01.docx
by switching the camera into WATCH mode when you leave home. After you return you
switch the camera into SLEEP mode and the appliances will turn on again. This minimizes
the risk of fire when you are not at home and it reduces consumption of electricity. You
need to set the smart socket to inverse mode so it disconnects contact when it is turned
ON by camera.
Switch will turn ON for 120 seconds.
Example of use in social care house: client presses wireless button. Smart socket turns
ON the light in the room where patient pressed their wrist HelpMe! button. Camera will
record video of the room at this moment.
Switch will turn ON for 120 seconds.
Example of use in factory: Smart socket switches ON external high-capacity siren to
signalize Fire alarm. Camera will record video in the hall where the wireless Fire detector
was activated.
Switch will turn ON for 120 seconds.
Example of use in shop: Smart socket switches OFF power supply to electric door locker
so the door remains locked after Alarm.
Switch will turn ON for the predefined wake-up time. The time can be configured in
JabloTool via USB > Configuration, General settings.
Example of use at home: Wireless socket switches ON lamp in courtyard when camera is
woken-up. The camera does not report Alarm yet.
Switch will turn ON and remain turned ON until AC power is recovered.
Example of use in remote location: Smart socket turns ON diesel power generator after
AC power failure.
Switch will turn ON and remain turned ON as long as camera infrared illumination is turned
ON.
Example of use at night: Smart socket turns ON external infrared illumination after camera
activates its internal infrared illumination. This will increase the reach at which the camera
can take pictures at night.
- 7 -