Passive Infrared (Pir) Detectors; Wireless Gas Leak Detector; Wireless Optical Barrier - JabloCom EYE-02 Application Note

3.3

Passive infrared (PIR) detectors

PIR detectors are activated by changes of temperature. This typically happens when a person or animal enters the detection
zone. Connecting of additional PIR sensors allows extending of the monitored area for spaces that do not need to be
monitored visually. External PIR sensors also extend the distance at which the camera can detect motion by passive infrared
detection. Activation of PIR detectors causes Alarm. Camera records video and informs the user about the Alarm.
Wireless PIR motion detector JA-80P
Example of use: Using detectors JA-80P to monitor motion in big factory hall. Several detectors can be
used at the same time.
Other available types: JA-80PB is PIR detector combined with glass-break detector, suitable for
areas accessible by breaking glass windows. JA-80W is PIR detector combined with microwave
detector. When PIR detector registers movement, the MW detector is activated and confirms activation
JA-80P
of the PIR detector. JA-86P is PIR detector with two PIR sensors inside Alarm is generated only when
both sensors are activated. Suitable for areas where false alarms can be caused by small animals.
JA-88P is PIR detector suitable for outdoor use. Detector is protected from dust and flushing water
(IP55).JA-85P and JA-85B are mini-size PIR detectors.
JA-82SH detects tilt and vibration of doors and windows.
3.4

Wireless gas leak detector

JA-80G is activated by combustive gases or fume leakages. This detector is mains-powered (230V AC)
because of higher power consumption. It also provides a switch to shut down an electric gas inlet valve.
Example of use at home: Detector is placed in the room with gas heating. Gas inlet valve is connected by
wires to the detector. If gas leaks, the detector reports this to the camera and camera generates Alarm. At
the same time, the detector shuts down the gas inlet.
JA-80G
3.5

Wireless optical barrier

JA-80IR is optical barrier which indicates breach into a protected area by crossing the infra-red line
between the transmitter and the receiver. It is a product of company Optex supplemented with
transmitters compatible with OASiS system. There can be up to 60m distance between the units. The
optical barrier can also be used outdoor, it is protected from dust and water.
Example of use at home: Optical barrier is placed along swimming pool on the garden. If a small child
crosses the barrier, the camera will inform the parents about this by call and SMS.
JA-80IR
Picture 3: Example of using camera with Fire detector, Flood detector and Door opening detector.
EYE-02.ENG.MAN.APN.Wireless_peripherals.01.docx - 5 -