Technical Specification - Technika TGC6IND-5 Instructions For Use And Installation

Failure Display and Inspection
If an abnormality occurs, the induction hob will enter a protective state
automatically and display corresponding protective codes:
Problem Possible causes
E4/E5 Temperature sensor failure
E7/E8
Temperature sensor of the
IGBT failure.
E2/E3
Abnormal supply voltage
E6/E9 Bad induction hob heat
radiation
WARNING: For you own safety, please do not disassemble the unit by yourself.
Any repairs must be carried out by a suitably qualified technician.

Technical Specification

Induction Hob
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size D×W×H(mm)
Building-in Dimensions A×B (mm)
Induction Hob
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size D×W×H(mm)
Building-in Dimensions A×B (mm)
Weight and Dimensions are approximate. Because we continually strive to improve our
products we may change specifications and designs without prior notice.
What to do
Please contact the Technika service
department.
Please contact the Technika service
department.
Please inspect whether power supply
is normal. Power the hob on after the
power supply is back to normal.
Please restart after the induction
hob cools down.
TGC6IND-5
4 Zones
220-240V~ 50 Hz or 60Hz
7200W
590×520×58
565×495
TGC9IND-5
5 Zones
220-240V~ 50 Hz or 60Hz
10800W
900×520×58
860×495
22