Technika TGC6IND-5 Instructions For Use And Installation page 24

A(mm) B(mm)
600min 50 min
Before you install the hob, make sure that
The work surface is square and level, and no structural members interfere with
•
space requirements.
The work surface is made of a suitable material.
•
If the hob is installed above an oven, the oven has a built-in cooling fan.
•
Installation is completed by a suitably qualified person.
•
The installation will comply with all clearance requirements and applicable local
•
standards and regulations.
A suitable isolating switch providing full disconnection from the mains power
•
supply is incorporated in the permanent wiring and is mounted and positioned to
comply with the local wiring rules and regulations.
The isolating switch will be easily accessible to the customer with the hob installed.
•
You consult local building authorities and by-laws if in doubt regarding installation.
•
You use heat-resistant and easy-to-clean finishes (such as ceramic tiles) for the wall
•
surfaces surrounding the hob.
C(mm) D
20 min Air intake
24
E
Air exit 5mm