Installation - Technika TGC6IND-5 Instructions For Use And Installation

Installation

Preparation of the work surface
Cut out the work surface according to the sizes shown in the drawing.
•
For the purpose of installation and use, a minimum of 50mm space shall be
•
preserved around the hole.
Be sure the thickness of the work surface is at least 30mm. and suitable for
•
the application.
L(mm)
TGC6IND-5
590
TGC9IND-5
900
Ensure the hob is well ventilated and the air inlet and outlet are not blocked.
Ensure the hob is in good working order.
Install Rangehoods and Exhaust Fans in accordance to the manufacturer's
instructions. No closer than 600mm above the hob for Rangehoods and 750mm
for Exhaust Fans.
W(mm) H(mm)
520 58
520 58
23
D(mm) A(mm)
54 565
54 860
B(mm) X(mm)
495 50 min
495 50 min