Technika TGC6IND-5 Instructions For Use And Installation page 16

Using the timer to switch off one or more cooking zones
Note: For model TGC9IND-5, there is no heating zone selection key of middle heating area.
You can set the timer whilst cooking zone is on and the power level indiction is blinking.
1. Select the heating zone that you wish to set the timer for.
2. Touch the timer key, "00" will show in the timer display
and the "0" will blink.
3. Set the time by touching the "slider" control (e.g. 5)
4. Touch the timer key again, then "0" will blink.
5. Set the time by touching the "slider" control (e.g.9)
6. Touch the timer key again.
Now the timer is set for 95 minutes
7. When the time is set, it will begin to count down immediately. The display will show
the remaining time.
Note: There will be a red dot in the right bottom corner of the
power level indicator which shows the timer is set for that zone.
8. When the set time expires, the corresponding cooking zone
will switch off automatically.
Note: Other cooking zones will keep operating if they were turned on previously.
16