E-Fly Wireless Dmx Set Up - Elation PALADIN Panel User Manual

E - F L Y W I R E L E S S D M X S E T U P
BEFORE SETTING THE WIRELESS CHANNEL ON ANY E-FLY
FIXTURE, MAKE SURE THE CONTROLLING E-FLY WIRELESS
DMX TRANSCEIVER DEVICE IS OFF.
TO CONTROL FIXTURE WITH E-FLY WIRELESS DMX SIGNAL
1. Ensure the controlling E-FLY wireless DMX Transceiver device is powered OFF and the
fixture is powered OFF and NO DMX cable is connected to the fixture.
2. Power ON fixture and from the OLED control panel navigate to the sub menu FLY_CH in the
FUNCTION main system menu, then set the desired E-FLY wireless channel (00-14) to the same
channel of the controlling E-FLY DMX Transceiver device.
3. Navigate to sub menu FLY_Swit in the FUNCTION main system menu and select ON.
NOTE: Erratic fixture movement may occur if other E-FLY wireless DMX products are in use in
the same area and are using the same E-FLY wireless channel. The fixture may immediately start
to respond to the DMX wireless signal from another E-FLY wireless DMX Transceiver immediately
when E-FLY is enabled. Make sure to know what E-FLY wireless channels are being used in the
area where the fixture is being installed.
4. Repeat this process for all E-FLY compatible fixtures in the E-FLY wireless network,
making sure all fixtures are assigned the same E-FLY wireless channel.
5. After all fixtures in the E-FLY wireless network have been set to the same E-FLY wireless
channel and powered ON, now power ON the controlling E-FLY DMX Transceiver device.
6. Test all fixtures connected to the E-FLY wireless network to confirm proper functionality.
20