Sony PDW-530 Operation Manual page 67

For the operation, see "Setting the shutter mode and
standard-mode shutter speed" on page 65.
S L S : 1 F R A M E
Example of viewfinder screen display for SLS setting operation
2
Turn the MENU knob clockwise or counterclockwise
until the desired number of frames appears.
The number of frames can be set to values in the range
1 to 8, and 16. (1 frame nearly equals to 1/30 second
(PDW-510/530) or 1/25 second (PDW-510P/530P)).
Changing the range of choice of shutter
mode and speed settings
You can reduce the time required to select the shutter mode
and speed by narrowing the choice of settings in advance.
This can be done by using the SHT ENABLE page of the
OPERATION menu.
Proceed as follows.
Note
The settings selected on the SHT ENABLE page of the
OPERATION menu become invalid when the RM-B150
Remote Control Unit is connected to the camcorder.
MENU knob
Changing the range of choice of shutter mode and speed settings
1
Set the MENU ON/OFF switch to ON while holding
down the MENU knob.
The TOP menu appears.
MENU ON/OFF switch
2
Turn the MENU knob to move the b mark to
OPERATION.
3
Press the MENU knob.
If this is the first time the OPERATION menu has been
displayed, the CONTENTS page of the OPERATION
menu appears. If the menu has been used before, the
last accessed page appears.
4
If the CONTENTS page is displayed, turn the MENU
knob to move the b mark to "SHT ENABLE", then
press the MENU knob to display the SHT ENABLE
page.
If a different page is displayed, turn the MENU knob
until the SHT ENABLE page appears, then press the
MENU knob to select the page.
17 SHT ENABLE
SHUTTER SLS
SHUTTER ECS
SHUTTER 1/100
SHUTTER 1/125
SHUTTER 1/250
SHUTTER 1/500
SHUTTER 1/1000
SHUTTER 1/2000
(This menu display is for the PDW-510/530. For the
PDW-510P/530P, "SHUTTER 1/60" is displayed
instead of "SHUTTER 1/100".)
5
Turn the MENU knob to move the b mark to the
shutter mode or shutter speed you want, then press the
MENU knob.
The b mark on the left of the selected item changes to
a z mark and the z mark on the left of the setting
changes to a ? mark.
6
Turn the MENU knob until "ON" appears, then press
the MENU knob.
The z mark on the left of the selected item changes to
a b mark and the ? mark on the left of the setting
changes to a z mark.
To set another mode or speed, return to step 5.
Note that only the shutter speeds set to "ON" can be
selected with the SHUTTER selector.
: ON
: ON
: ON
: ON
: ON
: ON
: ON
: ON
5-3 Setting the Electronic Shutter
67