Setting The Audio Recording Format60 - Sony PDW-530 Operation Manual

M09 VDR MODE
REC TALLY BLINK :
REC START/STOP
MODE SELECT
TIMER SET
REC FORMAT
6
Turn the MENU knob to move the b mark to "REC
FORMAT", and press the MENU knob again.
M09 VDR MODE
REC TALLY BLINK :
REC START/STOP
MODE SELECT
TIMER SET
REC FORMAT
The b mark at the side of "REC FORMAT" changes
to a z mark, and the z mark by "IMX50" changes to
a ? mark.
7
Turn the MENU knob to display the desired recording
format.
M09 VDR MODE
REC TALLY BLINK :
REC START/STOP
MODE SELECT
TIMER SET
REC FORMAT
8
Press the MENU knob.
This confirms the selection.
9
Align the b mark with "TOP" at the top right of the
menu page, and press the MENU knob.
This returns to the TOP menu.
5-1-2 Setting the Audio Recording
Format
You can select the audio recording format in a menu, from
16-bit 48 kHz and 24-bit 48 kHz. The factory default
selection is "16bit".
To select the desired audio recording format, proceed as
follows.
1
Display the AUDIO-2 page of the MAINTENANCE
menu.
60
5-1 Setting the Recording Format (PDW-530/530P only)
TOP
ON
: OFF
: SEL
: IH
: IMX50
TOP
ON
: OFF
: SEL
: IH
:? IMX50
TOP
ON
: OFF
: SEL
: IH
:? IMX40
For the operation, see the descriptions of steps 1 to 5
of the procedure "Setting the Video Recording
Format" on page 59.
2
Press the MENU knob, then turn it to move the b mark
to "AU DATA LEN (IMX)", and press the MENU
knob.
M06 AUDIO-2
AU DATA LEN (IMX):?16bit
AU REF LEVEL
AU REF OUT
AU CH12 AGC MODE :
AU CH34 AGC MODE :
AU AGC SPEC
AU LIMITER MODE
AU OUT LIMITER
I.LINK AUDIO OUT :
3
Turn the MENU knob to display the desired format,
and press the MENU knob.
4
Move the MENU ON/OFF switch to OFF or close the
cover of the menu operating section.
This ends the menu operation.
The above procedure completes the setting of the
recording format.
TOP
: -20db
: 0db
MONO
MONO
: -6db
: OFF
: ON
2CH