Menu List; Operation Menu List - Sony PDW-530 Operation Manual

Menu List

This section briefly explains menus that the camcorder
provides for adjustments and settings using tables.
For the menu organization and the USER menu, see
Chapter 6.

OPERATION Menu List

The following table lists and describes the items in the
OPERATION menu. Some pages of the OPERATION
menu have been registered in the USER menu at the
factory. These pages are indicated by a circle (
USER menu column. The USER MENU CUSTOMIZE
menu allows you to add and delete pages in the USER
menu to suit your requirements.
USER No. Page
menu
a 01 OUTPUT
a 02 TEST OUT
140
Menu List
) in the
a
Item Settings
LCD BRIGHT <L> (–32 to +31)
LCD BRIGHT <H> (–32 to +31)
LCD COLOR (–32 to +31)
I.LINLK SBP2 MODE ENABL/DSABL
REAR BNC OUT SEL VBS/SDI
(when option board is
connected)
TEST OUT MARKER OFF/ON
TEST OUT VFDISP OFF/ON
TEST OUT MENU OFF/ON
TEST OUT ZEBRA OFF/ON
TEST OUT SELECT ENC/R/G/B
This manual also explains some adjustments and settings
to be made using the OPERATION menu, PAINT menu,
MAINTENANCE menu, FILE menu and DIAGNOSIS
menu.
For details of these menus, refer to the Maintenance
Manual.
When the setting range in the Settings column is
surrounded by parentheses ( ), the setup value is a relative
value. The setting range shown on the menu screen may
differ from what is shown in the manual.
Default
0
0
0
DSABL
VBS
OFF
OFF
OFF
OFF
ENC
Description
See 6-3-2 "Selecting the
Output Signals" on page 94.
Selects whether or not the
marker signal is mixed to the
output signal from the TEST
OUT connector
Selects whether or not the VF
DISP display signal is mixed
to the output signal from the
TEST OUT connector.
Selects whether or not the
MENU display signal is mixed
to the output signal from the
TEST OUT connector.
Selects whether or not the
ZEBRA display signal is
mixed to the output signal
from the TEST OUT
connector.
Selects the output signal of
TEST OUT.