8-9 Putting on the Rain Cover (Not Supplied)
Attach the rain cover (part number 3-191-064-02) as
illustrated below. You can insert and remove cassette
tapes, operate various switches and controls, and mount
the camcorder on the tripod adaptor with the rain cover
attached.
When a shoulder
belt is not used,
cover the holes
on the rain cover
with caps.
Rear
Velcro tape
Pass the shoulder strap post clearly through this hole
on the rain cover.
126
8-9 Putting on the Rain Cover (Not Supplied)
When you use a
shoulder strap,
use these holes.
For details, see
the following
diagram.
Front
Drawstring
Insert the viewfinder barrel here with the eyecup out
and fasten the drawstring around the eyecup.
Drawstring
Velcro tape
Velcro tape