Sony PDW-530 Operation Manual page 108

If you want to set a file ID for the data to be saved
Set the file ID before going to step 3.
For details on setting the file ID, see "Setting the file
ID" on page 109.
3
Turn the MENU knob to move the b mark to "SCENE
STORE", and press the MENU knob.
F04 SCENE FILE
s1
s2
s3
s4
s5
sSTANDARD
SCENE RECALL
SCENE STORE
F.ID:
If no "Memory Stick" has been inserted, the SCENE
STORE page appears.
?P00 SCENE STORE
DISPLAY MODE
MEM-01:STANDARD
MEM-02:STANDARD
MEM-03:STANDARD
MEM-04:STANDARD
MEM-05:STANDARD
4
Select the desired file number.
When no "Memory Stick" has been inserted
Turn the MENU knob to move the b mark to the
desired file number, and press the MENU knob.
When the save is completed, the SCENE FILE page
appears again.
When you select a file number where data has
already been saved
The message "OVERWRITE OK? YES b NO"
appears. In this case, the b mark is placed on the left
of "NO".
• To stop overwriting, press the MENU knob.
• To overwrite, move the b mark to "YES" and press
the MENU knob.
When a "Memory Stick" has been inserted
You can use up to 20 pages, from P01 to P20, to save
scene files in the "Memory Stick". Each page can hold
up to 5 files.
1 Turn the MENU knob until the page which
contains the desired file number appears, then press
the MENU knob.
108
7-2 Saving and Loading Scene Files
TOP
:STANDARD
:STANDARD
:STANDARD
:STANDARD
:STANDARD
: EXEC
: EXEC
ESC
: ALL
P01 SCENE STORE
DISPLAY MODE
001.SCENE1
002.STANDARD
003.STANDARD
004.STANDARD
005.STANDARD
***.5FILE SAVE
2 Turn the MENU knob to move the b mark to the
desired file number, and press the MENU knob.
The message "STORE OK? YES b NO" appears.
P01 SCENE STORE
STORE OK?
DISPLAY MODE
001.SCENE1
002.STANDARD
003.STANDARD
004.STANDARD
005.STANDARD
***.5FILE SAVE
3 To carry out the storing, move the b mark to
"YES" and press the MENU knob.
To cancel, press the MENU knob leaving the b
mark pointing to "NO".
You can select the contents of the user file to be
displayed on the page.
For details, see "Selecting the display contents" on
page 110.
5
To end the menu operation, set the MENU ON/OFF
switch to OFF or close the cover of the menu operating
section.
To return to the SCENE FILE page
After the message "COMPLETE" is displayed, move
the b mark to "ESC" at the top right of the page by
turning the MENU knob, then press the MENU knob.
White balance setting data to be saved in
the scene file
The white balance setting data to be saved in the scene file
depends on the setting of the SCENE WHITE DATA item
on the REFERENCE page of the FILE menu.
F05 REFERENCE
REFERENCE STORE :
REFERENCE CLEAR :
REFERENCE LOAD
REFERENCE SAVE
F.ID: sssssssssssssssss
SCENE WHITE DATA:
ESC
: ALL
FEB/05/02
MEM1-5
ESC
YES NO
: ALL
FEB/05/02
MEM1-5
EXEC
EXEC
: EXEC
: EXEC
OFF