Maintenance and service
6.1
Maintenance
The device is maintenance-free, however, a periodic inspection according pertinent directives
and regulations must be carried out.
An inspection can include check of:
● Ambient conditions
● Seal integrity of the process connections, cable entries, and cover screws
● Reliability of power supply, lightning protection, and grounds
6.2
Recalibration
Siemens Flow Instruments offers to recalibrate the sensor. The following calibrations are
offered as standard:
● Standard matched pair calibration
● Accredited matched pair calibration
Note
For recalibration the transmitter must always be returned with the sensor
6.3
Technical support
NOTICE
Repair and service must be carried out by approved Siemens Flow Instruments personnel
only.
Note
Siemens Flow Instrument defines sensors as non-repairable products.
SITRANS F US SONO 3300
Operating Instructions, 01/2010, SFIDK.PS.029.J4.02
6
25