Chapter 3.Connecting To The Ap; System Requirements; Installing The Ap; Taking The Cover Off - Planet WNAP-W2200UE User Manual

3.1

System Requirements

Broadband Internet Access Service (Cable/xDSL/Ethernet connection)

One IEEE 802.3at PoE switch (supply power to the WNAP-W2200UE)

PCs with a working Ethernet adapter and an Ethernet cable with RJ45 connectors

PCs running Windows 98/ME, NT4.0, 2000/XP, Windows Vista / Win 7, MAC OS 9 or later, Linux,

UNIX or other platforms compatible with TCP/IP protocols
1. The AP in the following instructions refers to PLANET WNAP-W2200UE.
2. It is recommended to use Internet Explorer 11, Firefox or Chrome to access the AP.
3.2

Installing the AP

Before installing the AP, make sure your PoE switch is connected to the Internet through the broadband service
successfully at this moment. If there is any problem, please contact your local ISP.
Step 1. Follow the figure below to install the WNAP-W2200UE.
Use the flat-blade screwdriver to take the cover of the WNAP-W2200UE off.
Chapter 3. Connecting to the AP
Figure 3-1 Taking the Cover Off
-11-
User Manual of WNAP-W2200UE