Table of Contents
Advertisement
2.1 Preparation before Installation
2.1.1 Safety Precautions
1.
To keep you safe and install the hardware properly, please read and follow these safety precautions.
2.
If you are installing the WBS-502AC for the first time, for your safety as well as others', please seek
assistance from an installer who has received safety training on the hazards involved.
3.
Keep safety as well as performance in mind when selecting your installation site, especially where there
are electric power and phone lines.
4.
When installing the WBS-502AC, please note the following things:
♦
Do not use a metal ladder;
♦
Do not work on a wet or windy day;
♦
Wear shoes with rubber soles and heels, rubber gloves, and a long-sleeved shirt or jacket.
5.
When the system is operational, avoid standing directly in front of it. Strong RF fields are present when the
transmitter is on.
2.2 Installation Precautions
Users MUST use a proper and well-installed surge arrestor and grounding kit with the WBS-502AC;
otherwise, a random lightning could easily cause fatal damage to the WBS-502AC. EMD (Lightning)
DAMAGE IS NOT COVERED UNDER WARRANTY.
Users MUST use the "Power cord and PoE Injector" shipped in the box with the WBS-502AC. Use of
other options will cause damage to the WBS-502AC.
User Manual of WBS-502AC
Chapter 2. Connecting to the AP
-14-
Advertisement
Table of Contents
