Specifications; Option For Expansion - Nature Power 40400 Owner's Manual

7. SPECIFICATIONS

Note: Specifications are subject to change without notices.
Inverter Specification:
Output Current/Power:
Surge Power:
Output Voltage:
Output Waveform:
Peak Efficiency:
No Load battery draw (unit in standby):
DC Input Voltage operating range:
Internal AC Charger Specification:
Output Current:
Output Voltage (Absorption/Float):
Recharge Voltage:
Efficiency:
Charger type:
Solar Panel Charger Specification:
Output Current:
Output Voltage:
Recharge Voltage:
Input DC Voltage:
Efficiency:
Charger Type:
Battery Specification:
Battery Capacity:
Battery Type:
Regulatory Approval (ETL certify):
8. OPTIONS FOR EXPANSION
This Solar Home and RV Kit is a modular design. Battery capacity can easily be
extended with multiple standalone Nature Power battery boxes or to external 12 Volt
batteries through the external mating connector to connect in parallel with the unit
through a pre-wired built-in internal connector located by the side of the unit. External
AC or Solar chargers are also available to improve battery charging time. For more
information, please visit
Extend unit run time with Nature Power solution:

Purchase Nature Power 12V 60Ah battery box with 4A solar input port Purchase
Nature Power Mating connector with wire and ring terminal to connect your own
12 Volt battery.
Reduce battery charging time with Nature Power solution:
The following options are available to improve battery charging time.
 20/40A high current charger
 30A DC to DC controller
 30A MPPT controller
 90W Solar panel
www.naturepowerproducts.com
Page 19
12A/1440W continuous
15A/1800W maximum
2880W peak
120 VAC/ 60 Hz
Modified Sinewave
90%
< 3W
10.5 – 15.5 Vdc
5 ADC
14.8/13.5 VDC
12.6 VDC
80%
3 stages (bulk/absorption/float)
4A maximum
14.8/13.5 VDC
12.6 VDC
9 - 26 VDC maximum
>95%
PWM control
12V, 60Ah
Sealed Lead Acid (Deep cycle)
CSA C22.2 no. 107.1
UL 1741
UL 458
or talk to your local supplier.