Table of Contents
Advertisement
Maximum number
For the maximum adapters supported, see the PCI adapter placement topic collection for your
system.
Attributes
v Four external mini SAS HD 4x connectors provide attachment of SAS devices
v SAS Serial SCSI Protocol (SSP) and Serial Management Protocol (SMP)
v Concurrent firmware update
v Removable media device (DVD and SAS tape) are supported in a single controller
configuration only and cannot be combined with disk devices attached to the same adapter.
Removable media is not supported in multi-initiator and high availability (dual storage IOA)
configurations
v Support for multi-initiator and high availability or single controller configurations
Operating system or partition requirements
If you are installing a new feature, ensure that you have the software that is required to support the new
feature and that you determine whether there are any prerequisites for this feature and attaching devices.
To check for the prerequisites, see IBM Prerequisite website (www-912.ibm.com/e_dir/eServerPrereq.nsf).
The adapter is supported on the following versions of the operating systems:
v AIX
– AIX Version 7.1, or later.
– AIX Version 6.1, or later.
v Linux
– Red Hat Enterprise Linux 6.4, or later.
– SUSE Linux Enterprise Server 11 Service Pack 3, or later.
– The latest version of iprutils can be downloaded from IBM Service and Productivity Tools website
(http://www14.software.ibm.com/webapp/set2/sas/f/lopdiags/home.html).
v IBM i
– IBM i 7.1 (with TR7), or later.
– IBM i 6.1 (with 6.1.1-M Machine Code), or later.
v Supported on Firmware level 7.8, or later.
This adapter requires the following drivers:
v AIX: devices.pci.14104A0 device driver package
PCIe2 LP 4-port 1GbE Adapter (FC 5260; CCIN 576F)
Learn about the specifications and operating system requirements for the feature code (FC) 5260 adapters.
Overview
FC 5260 and FC 5899 are both the same adapter with different feature codes. FC 5260 is a low-profile
adapter and the FC 5899 is a full-height adapter. The names of these two adapters are:
v FC 5260: PCIe2 LP 4-port 1GbE Adapter
v FC 5899: PCIe2 4-port 1GbE Adapter
The PCIe2 LP 4-port 1GbE Adapter is a short, low-profile, generation-2 PCIe adapter. This adapter
provides four 1-Gb Ethernet ports that can be configured to run at 1000 megabits per second (Mbps) (or 1
gigabit per second (Gbps)), 100 Mbps, or 10 Mbps. The adapter connects to a network that uses
unshielded twisted pair (UTP) cable for distances of up to 100 meters (328.08 feet). The adapter supports
AIX Network Installation Management (NIM) boot capability. The adapter conforms to the IEEE 802.3ab
1000Base-T standard. The adapter supports jumbo frames when running at the 1000 Mbps speed.
76
Power Systems: Managing PCI adapters for the IBM Power 710 Express or the IBM Power 730 Express
Advertisement
Table of Contents
