Measdata An Iarraytransfer Interface Which Supports The Measurement Object; Nadataformat_Linmag; Nadataformat_Logmag; Nadataformat_Phase - Agilent Technologies PNA Series User And Programming Manual

Write-only Data Access Map
PutNAComplex Method
Description Puts complex data into the specified location. This method forces the channel into Hold
mode to prevent the input data from being overwritten. The data is processed and
displayed.
Data put in the naRawData store will be re-processed whenever a change is made to
the measurement attributes such as format or correction.
Data put in the naMeasResult store will be overwritten by any measurement attribute
changes (such as moving a marker).
Note: This method uses NAComplex which is a user-defined data type. If you cannot or
prefer not to use this data type, use the putComplex method.
VB Syntax measData.putNAComplex location, numPts, data, [format]
Variable (Type) - Description
measData An IArrayTransfer interface which supports the Measurement object
location (enum NADataStore) Where the Data will be put. Choose from:
0 - naRawData
1 - naCorrectedData
2 - naMeasResult
3 - naRawMemory
4 - naMemoryResult
5 - naDivisor - When reading data from, or writing data to, the normalization divisor, you
must first create a divisor trace using DataToDivisor Method.
numPts (long integer) - Number of data points in the channel
data (NAComplex) - A one-dimensional array of Complex data matching the number of
points in the current measurement.
format (enum NADataFormat) - Optional argument. Format of the data. If unspecified,
naDataFormat_Polar is assumed. Only used when the destination store is
naMeasResult or naMemoryResult.

0 - naDataFormat_LinMag

1 - naDataFormat_LogMag

2 - naDataFormat_Phase

3 - naDataFormat_Polar

4 - naDataFormat_Smith

5 - naDataFormat_Delay

6 - naDataFormat_Real

2043