The Displayed Format. Choose From - Agilent Technologies PNA Series User And Programming Manual

Read-only
GetRaw2DData Method
Description Returns raw data at all frequency and power data points for any GCA sweep. Previously
2D sweep only.
Use the standard
background sweeps).
A compression parameter must be present.
VB Syntax
data = gca.GetRaw2DData location, format, param
Variable (Type)
data Variant array in which to store returned measurement data.
gca A
location (enum NADataStore) - Where the data you want is residing. Choose from:
0 - naRawData
1 - naCorrectedData
format (enum NADataFormat) - Format in which you would like the data. It does not have to be

the displayed format. Choose from:

0 - naDataFormat_LinMag
1 - naDataFormat_LogMag
2 - naDataFormat_Phase
3 - naDataFormat_Polar*
4 - naDataFormat_Smith*
5 - naDataFormat_Delay -- Not valid for this command.
6 - naDataFormat_Real
7 - naDataFormat_Imaginary
8 - naDataFormat_SWR
9 - naDataFormat_PhaseUnwrapped
10 - naDataFormat_InverseSmith
When using SMART sweep, ALL data is returned including ALL background
iteration sweeps. Use
The number of data points that are returned is always the number of frequency
points times the number of iteration sweeps.
When using 2D sweeps, ALL data is returned. The number of data points returned
/ freq may vary. Learn more.
"get data"
- Description
GainCompression (object)
TotalIterations to determine the number of iteration sweeps.
commands to return just the displayed data results (not the
Learn more.
1950
About Gain Compression