Led Indications For All Sam600 Modules - ABB SAM600 Operation Manual

Section 7
Technical Data
LED status indication
Status indications
Status indications
7.2.3

LED indications for all SAM600 modules

The SAM600 modules contain several LEDs to indicate the current operation states. The main
SAM600 module indication LEDs are located on the front side (see
common for all the three SAM600 module. Enumerated from top to bottom these LEDs are
indicating:
• Ready (green)
• Warning (yellow)
• Alarm (red)
There are 4/8 more LEDs on the sides that indicate the network activity and link state of the
optical transceivers. For SAM600-CT and SAM600-VT modules (see
for the optical transceivers link state and there are 8 LEDs for SAM600-TS (see
IEC18000512 V1 EN-US
Figure 22: Top side view with LEDs
IEC18000532 V1 EN-US
Figure 23: CT/VT side of the optical transceivers with the LEDs D2.1 to D2.4
46
D2/D9
D2.1-D2.4
D9.1-D9.4
© Copyright 2017 ABB. All rights reserved
NA
NA
Figure
Figure
SAM600 Process Bus I/O System
1MRK 511 434-UEN B
For more details refer to
Section 7.2.3
For more details refer to
Section 7.2.3
GUID-CA1D6DAE-130B-45EE-A07F-6CAA2FBB492A v1
22). These 3 LEDs are
23), there are 4 LEDs
Figure 24).
Operation Manual