Sam600-Vt - ABB SAM600 Operation Manual

Section 7
Technical Data
Interface
Current phase L2+
Current phase L3-
Current phase L3+
Current phase N-
Current phase N+
Optical network interface
IEC/UCA 61850-9-2LE process bus/
system bus
IEC/UCA 61850-9-2LE process bus/
system bus
Electrical network interface
IEC/UCA 61850-9-2LE process bus/
system bus
IEC/UCA 61850-9-2LE process bus/
system bus
Configuration interface
Connection to SAM600
configuration tool
LED status indication
Status indications
7.2.2.2

SAM600-VT

SAM600-VT has four voltage measurement channels and digital inputs for auxiliary signal
supervision. Those channels are accessible via the connectors X11 and X10, respectively.
Figure 18
module.
Side plate connector positions
IEC18000528 V1 EN-US
Figure 18: SAM600-VT module electrical Ethernet side view
IEC18000529 V1 EN-US
Figure 19: SAM600-VT module fiber optical Ethernet side view
42
and Figure 19 depict the position and numbering of connectors of the SAM600-VT
© Copyright 2017 ABB. All rights reserved
Connector Pin
X13 2
X12 1
X12 2
X11 1
X11 2
X101/X102
X101 NA
X102 NA
X103/X104
X103 NA
X104 NA
X105
X105 NA
D2
D2.1-D2.4 NA
1MRK 511 434-UEN B
Remark
SFP cage for optional
100Base-FX SFP module
SFP cage for optional
100Base-FX SFP module
100Base-TX
100Base-TX
USB-A/USB-A cable
For more details refer
to Section 7.2.3
GUID-9F23E161-3BBF-468E-8468-F8FB7F00939B v1
SAM600 Process Bus I/O System
Operation Manual