5-2-4. Printing position
Print is started from when the platen is rotated about 250˚. The system cam is rotated, the thermal head is
pressed against the platen and the ribbon motor and platen are rotated. The above figure shows the print
start condition of yellow. The rear edge of paper is left at the paper lead flap.
5-2-5. Fast forward position
When each color printing is ended, the thermal head is separated and fast forward is performed.
Platen ............ Positioning of paper, and eject paper start
Ribbon .......... Beginning detection of magenta and cyan
UP-D2600/V1(E)
Fig. 5-6.
Fig. 5-7.
5-7