Sony UP-D2600S Service Manual page 93

NG Command List 3
A way of looking the list: In case of h ' 24 = 0010 0100 (Refer to HEX code converted as binary code.)
NG sensor is the second bit (LOAD FG) and fifth bit (RIBBON CD0).
NG_CODE4
NG command NG bit Contents of NG
h' E5 bit 6 RIBBON_CD1_ERROR
bit 5 RIBBON_CD0_ERROR
bit 4 BARCODE_ERROR
bit 3 PP_JAM_ERROR
bit 2 LOAD_FG_ERROR
bit 1 RIBBON_FG_ERROR
bit 0
A way of looking the list: In case of h ' 42 = 0100 0010 (Refer to HEX code converted as binary code.)
NG sensor is the first bit (LOAD TMG sensor) and sixth bit (JAM sensor).
NG_CODE5
NG command NG bit Contents of NG
h' E0 bit 6 PP_JAM_ERROR
bit 5 END_OF_RIBBON
bit 4 NO_RIBBON
bit 3 NO_PAPER
bit 2 REMOVE_PRINTS
bit 1 REMOVE_PRINTS
bit 0 CLOSE_COVER
NG_CODE6
NG command NG bit Contents of NG
h' E3 bit 6 PLT_POS
bit 5 LOAD_FG
bit 4 RBN_FG
bit 3 TRAY_POS1
bit 2 TRAY_POS0
bit 1 HED_POS1
bit 0 HED_POS0
UP-D2600/V1(E)
Board/REF Check item
SE-423 board/D302 . Connector is disconnected and parts are
SE-424 board/Q351 defective.
. Optical axis is out of place.
SE-423 board/D301 . Connector is disconnected and parts are
SE-424 board/Q350
. Optical axis is out of place.
SE-425 board/PH401 . Connector is disconnected and parts are
defective.
. Optical axis is out of lace.
SE-422 board/PH250 . Connector is disconnected and parts are
defective.
SE-418 board/PH101 . Connector is disconnected and parts are
defective.
SE-417 board/PH1 . Connector is disconnected and parts are
defective.
Board/REF Check item
SE-422 board/PH250 There is a print paper in the mechanical
deck.
SE-423 board/D301, D302 Ribbon end
SE-424 board/Q350, Q351
Pushbutton SW There is no ribbon cartridge.
SE-426 board/PH451 There is no print paper.
SE-428 board/PH550 EJCT_TMG sensor becomes ON.
SE-427 board/PH501 LOAD_TMG sensor becomes ON.
SE-429 board/S150 PLATEN_COVER is opened.
Board/REF Check item
SE-419 board/PH150 . Connector is disconnected.
SE-418 board/PH1 . Parts are defective.
. There is no sensor sensitive by mistaken
SE-417 board/PH1
SE-429 board/PH602 assembling the mechanism.
SE-429 board/PH601
SE-420 board/PH202
SE-420 board/PH201
defective.
3-19