Sony RM-LP211 Operating Instructions Manual page 23

Clearing all the contents of
remote's memory
1
Press RM SET UP.
The set up list appears.
p
2
Move the easy scroll key to select "ALL
CLEAR", then press the key to enter
the selection.
The ALL CLEAR list appears.
p
3
Move the easy scroll key to select
"Yes", then press the key to enter the
selection.
"CLEAR OK?!" appears.
p
4
Move the easy scroll key to select
"Yes" again, then press the key.
All the contents of the remote's memory
(i.e., all the programmed data) are cleared.
GB
23