Download  Print this page

Selecting A Sound Field - Sony RM-LP211 Operating Instructions Manual

Remote commander
Hide thumbs

Advertisement

Selecting a component (continued)
If you selected the tape deck
Move the easy scroll key to display the
information about deck A or B.
Note
When the remote is programmed to control a
non-Sony tape deck, the following may occur:
– The information about deck B is not displayed and
you cannot switch between tape deck A and B.
– "TAPE A/B" is displayed and tape deck A and B
switch automatically each time you press the easy
scroll key, etc.
If you selected 2ND ROOM or 3RD
ROOM
(North American model only)
Move the easy scroll key to select the source
for 2nd room or 3rd room, then press the key.
GB
14

Selecting a sound field

Do the procedure below to select a sound field
from the sound field list.
1
Press SOUND FIELD.
The sound field list appears.
2
Move the easy scroll key to select the
sound field, then press the key to enter
the selection.
A display example
p
To turn off the sound field
Move the easy scroll key to select either
"AUTO DECODING" or "2CH STEREO" in
the sound field list in the display.
Tip
You can sort the sound field list (page 18).

Hide quick links:

Advertisement

loading

  Related Manuals for Sony RM-LP211