Table of Contents
Advertisement
Quick Links
How to assemble and InstallatIon
tHe perlICk modular bar dIe system
Important InstallatIon InformatIon
The Perlick Modular Bar Die System makes building
a bar quick and easy. The bar die arrives on the job
site in sections up to eight feet long with stainless
steel underbar equipment already installed, saving
time and labor costs.
floor preparatIon
We suggest the bar die be installed on an unfinished
floor. Tile can then belaid, abutted to the bar die, to form
a watertight seal.
These illustrated, easy to follow instructions help to
ensure a professional, trouble-free installation.
8300 West Good Hope Road • Milwaukee, WI 53223 • Phone 414-353-7060 • Fax 414-353-7069
Toll Free 800-558-5592 • E-Mail: Perlick@Perlick.com • www.Perlick.com
MODEL NOS.
MBS
table of Contents
General Information ............................................... 2
Utility Specs .......................................................... 2
Floor Sink Location ............................................... 3
Uncrating ............................................................... 4
Placing ................................................................... 4
Joining ................................................................... 4
Leveling ................................................................. 5
Attaching Bar Die to the Floor .............................. 5
Installing Beer Lines .............................................. 5
Installing Utility Lines ............................................ 6
Sealing the Bar to the Floor .................................. 6
Front Finishing Panels ........................................... 7
Bar Top .................................................................. 8
Soda Guns ............................................................ 8
Form No. Z2162
Rev. 06.12.10
Advertisement
Table of Contents
Related Manuals for Perlick MBS
Summary of Contents for Perlick MBS
-
Page 1: Table Of Contents
MODEL NOS. table of Contents Important InstallatIon InformatIon General Information ..........2 The Perlick Modular Bar Die System makes building Utility Specs ............2 a bar quick and easy. The bar die arrives on the job Floor Sink Location ..........3 site in sections up to eight feet long with stainless Uncrating ............... -
Page 2: General Information
Locate floor drains directly below workboard equipment. The number of floor drains will vary depending on the bar layout and local codes. Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice. Form No. Z22162 Rev. 06.12.10... -
Page 3: Floor Sink Location
Option 1 Options 2 & 3 Locating Floor Sinks Choose your option depending upon local codes. Option 4 Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice. Form No. Z22162 Rev. 06.12.10... -
Page 4: Uncrating
Move sections to desired location, over previously- placed beverage line conduits, plumbing and elec- trical rough-in stub ups. Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice. Form No. Z22162 Rev. 06.12.10... -
Page 5: Leveling
The installing contractor will select the best method for your individual installation. With chase plate in place. Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice. Form No. Z22162 Rev. 06.12.10... -
Page 6: Installing Utility Lines
For sanitary purposes, the bar can then be sealed to the floor using your choice of methods. Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice. Form No. Z22162 Rev. 06.12.10... -
Page 7: Front Finishing Panels
End panels to conceal the structure at gate openings or bar end, etc. are not supplied by Perlick. They should be fabricated by the millworker. Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice. Form No. Z22162 Rev. 06.12.10... -
Page 8: Bar Top
Concealing Soda Manifold. Installs on TS6CO. Accessory Part #7055-66SG. b) Fasten top to bar structure using #10 x 1/2" long round head screws. Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice. Form No. Z22162 Rev. 06.12.10...
Need help?
Do you have a question about the MBS and is the answer not in the manual?
Questions and answers