Sony RM-AV3100 Operating Instructions Manual page 67

6
Press the TIME key.
Set the timer-on hour by pressing the
or button.
Then press the
the minute flashes.
(You can switch the mode between the
hour setting and the minute setting by
pressing the or
Set the minute by pressing the
button.
Then press the ENTER key.
The time of the timer setting is
decided.
The display returns to step 4.
7
Press the MACRO key.
The Commander enters the Timer
Macro setting mode.
button so that
button.)
or
8
Press a Component Select button,
a SYSTEM CONTROL button, or
a Label key to program the
information of that button or key
as a procedure to be executed by
the timer.
When selecting a Label key for a
component name, press the OTHER
button to change the Label keys.
When selecting a Label key for a
system number, press the MORE
button to change the Label keys.
If you select a component name
Function keys for the component are
displayed. Go to Step 9.
If you select a system number
Go to Step 10.
9
Press a button or a key of which
function you want to program as
a step.
10
Repeat Steps 8 and 9.
When 32 steps are input, the Macro
step programming finishes with a
beep sound, and a series of Macro
procedure appears on the display
window.
And the display returns to step 3.
Notes
• You can input up to 32 steps for one timer
program number.
• A System Macro can be input as a step.
• A macro programmed for the Component
Select button or the Label key is available
as the same setting as its output setting.
• The step of the TIMER button has an
interval of 250 ms.
• The Mode Display key, the OTHER
button, the LIGHT button and the MORE
button are not counted as steps.
Continued
67