Specifications; Transaxle - Toro TimeCutter Z Series Service Manual

SPECIFICATIONS

Specifications
ENGINE:
High Idle 3400 ± 100 RPM
Low Idle 1400 RPM
1b
Manufacturer Briggs & Stratton
Horsepower (kW) 16.5 HP (12.3kW) @ 3600 RPM
Fuel Unleaded Gasoline 87 octane min.
FUEL SYSTEM:
Capacity 5 Gallon (18.9 L)
TRACTION SYSTEM:
Transaxles Twin Hydro-Gear IZT Hydrostatic
Transaxle Drive Belt drive with self-tensioning system
Ground Speed Infinite, 0 to 6.5 MPH (10.5-km/hr) forward
TIRES:
Rear Drive Tires 18x10-8 4 ply with "Multitrac CS" Tread
Front Caster Tires 410/350 x 4 - 4.25 IS with "sawtooth" tread 410/350 x 4 - 4.25 IS with "sawtooth" tread
Tire Pressure 13 psi (90 kPa) rear, 35 psi (241 kPa) front 13 psi (90 kPa), rear 35 psi (241 kPa) front
ELECTRICAL
SYSTEM:
Battery Voltage 12 volt, negative ground
Battery Type BCI Group U1
DIMENSIONS:
Wheel Base 52.1 in. (132.3 cm) center of caster to
Overall Width 55 in. (139.7 cm) with deck deflector down
Overall Length 77.5 in. (196.9 cm)
WEIGHT:
Net Weight 635 lbs. (approx.)
HEIGHT OF CUT:
1 - 4
Z16-44
Transaxles
0 to 3.4 MPH (5.5-km/hr) reverse
center of drive tires
46.6 in. (118.4 cm) gate width with deck
deflector up
Adjusts from 1.5" (3.8 cm) to
4.5" (11.4 cm) (7 positions)
Z17-44
3400 ± 100 RPM
1400 RPM
Kohler
17 HP (12.7 kW) @ 3600 RPM
Unleaded Gasoline 87 octane min.
5 Gallon (18.9 L)
Twin Hydro-Gear IZT Hydrostatic
Transaxles
Belt drive with self-tensioning system
Infinite, 0 to 6.5 MPH (10.5-km/hr) forward
0 to 3.4 MPH (5.5-km/hr) reverse
18x10-8 4 ply with "Multitrac CS" Tread
12 volt, negative ground
BCI Group U1
52.1 in. (132.3 cm) center of caster to
center of drive tires
55 in. (139.7 cm) with deck deflector down
46.6 in. (118.4 cm) gate width with deck
deflector up
77.5 in. (196.9 cm)
635 lbs. (approx.)
Adjusts from 1.5" (3.8 cm) to
4.5" (11.4 cm) (7 positions)
TimeCutter™ Z Service Manual