Toro TimeCutter Z Series Service Manual page 11

Specifi cations cont.
Tires:
Rear Drive Tires
Front Castor Tires
Tire Pressure
Electrical System:
Battery voltage
Fused
Dimensions:
Wheel Base
Width
Overall Width
Overall Length
Overall Height
Track Width
Deck Width
Weight:
Height of Cut:
Tip Speed:
TimeCutter ZX Service Manual
ZX 17K-44
18x10-8 4 ply with "Multitrac CS" Tread
410/350x4 - 4.25 IS with "sawtooth" tread 410/350x4 - 4.25 IS with "sawtooth" tread
13 psi (90kPa) rear, 35 psi (241kPa) front 13 psi (90kPa) rear, 35 psi (241kPa) front
12 volt negative ground.
(1) 30 amp blade type main.
(1) 25 amp blade type charge system.
(1) 10 amp included with optional light kit.
52.1" (132.3cm) center of castor wheel to
center of drive tires.
43" (109.2cm) outside rear tires.
55" (139.7cm) with deck defl ector down.
46.6" (188.4cm) Gate width with deck
defl ector up.
77.5" (196.9cm)
40" (101.6cm)
35.2" (89.4cm) center to center of rear
tires.
30.4" (77.2cm) center to center of castor
tires.
55" (139.7cm) with defl ector down.
635 lbs. (288kg) (estimated)
Adjusts from 1.5" to 4.5" (7 postions)
18,160 ft/min @ 3400 RPM nominal
18,770 ft/min @ 3500 RPM max
SPECIFICATIONS
ZX 17-44
18x10-8 4 ply with "Multitrac CS" Tread
12 volt negative ground.
(1) 30 amp blade type main.
(1) 25 amp blade type charge system.
(1) 10 amp included with optional light kit.
52.1" (132.3cm) center of castor wheel to
center of drive tires.
43" (109.2cm) outside rear tires.
55" (139.7cm) with deck defl ector down.
46.6" (188.4cm) Gate width with deck
defl ector up.
77.5" (196.9cm)
40" (101.6cm)
35.2" (89.4cm) center to center of rear
tires.
30.4" (77.2cm) center to center of castor
tires.
55" (139.7cm) with defl ector down.
635 lbs. (288kg) (estimated)
Adjusts from 1.5" to 4.5" (7 postions)
18,160 ft/min @ 3400 RPM nominal
18,770 ft/min @ 3500 RPM max
1b
A1-7