Toro TimeCutter Z Series Service Manual page 19

Specifi cations cont.
Tires:
Rear Drive Tires
Front Castor Tires
Tire Pressure
Electrical System:
Battery voltage
Fused
Dimensions:
Wheel Base
Width
Overall Width
Overall Length
Overall Height
Track Width
Deck Width
Weight:
Height of Cut:
Tip Speed:
TimeCutter ZX Service Manual
ZX 480
18x10.5-4 ply
410/350x4 with "sawtooth" tread
13 psi (90kPa) rear, 35 psi (241kPa) front 13 psi (90kPa) rear, 35 psi (241kPa) front
12 volt negative ground.
(1) 30 amp blade type main.
(1) 25 amp blade type charge system.
(1) 25 amp blade type charge system.
52.1" (132.3cm) center of castor wheel to
center of drive tires.
43" (109.2cm) outside rear tires.
62.5" (158.8cm) with deck defl ector
down.
53.5" (135.9cm) Gate width with deck
defl ector up.
77.5" (196.9cm)
40" (101.6cm)
35.2" (89.4cm) center to center of rear
tires.
30.4" (77.2cm) center to center of castor
tires.
62.5" (158.8cm) with defl ector down.
646 lbs. (293 kg) (estimated)
Adjusts from 1.5" to 4.5" (7 postions)
15,710 ft/min @ 3400 RPM nominal
16,170 ft/min @ 3400 RPM nominal
SPECIFICATIONS
ZX 525
18x10.5-10 4 ply with "Multitrac CS"
Tread
410/350x4 with "sawtooth" tread
12 volt negative ground.
(1) 30 amp blade type main.
(1) 25 amp blade type charge system.
(1) 10 amp (blade type) included with
optional light kit.
52.1" (132.3cm) center of castor wheel to
center of drive tires.
47.6" (120.9cm) outside rear tires.
68" (165.1cm) with deck defl ector down.
55" (147.3cm) Gate width with deck
defl ector up.
77.5" (196.9cm)
41" (101.6cm)
37.5in. (95.3cm) center to center of rear
tires.
30.4" (77.2cm) center to center of castor
tires.
68" (165.1cm) with defl ector down.
695 lbs. (315 kg) (estimated)
Adjusts from 1.5" to 4.5" (7 postions)
17,500 ft/min @ 3400 RPM nominal
18,070 ft/min @ 3500 RPM max
1b
A1-15