Jumper And Switch Settings - ZiLOG Z8 Encore! MC Series User Manual

Jumper and Switch Settings

The MDS module has two SPDT switches (S1 and S2) and a 10 K
potentiometer (R7) used by the development kit's preloaded
demonstration software to perform the following functions:
•
•
•
The jumpers on the MC MDS module function as described in
Table 2. MC MDS Module Jumper Settings
Jumper Jumper Name
J2 DIS_RS232
J3 DIS_IRDA
J4 J4
J5 J5
UM019204-0208
Z8FMC16100 Series Motor Control Development Kit
S1, DIRECTION—Used to change the 3-phase motor spin direction.
S2, RUN/STOP—Used to turn the 3-phase motor ON and OFF.
R7, SPEED—Used to adjust the 3-phase motor RPM.
Shunt
Position Function
IN Disables the RS-232 interface.
OUT Enables the RS-232 interface.
IN Disables the IRDA interface.
OUT Enables the IRDA interface.
1–2 Enables external analog input from header J1
(ANA2).
2–3 Disables external analog input from header J1
(ANA2).
1–2 Enables external analog input from header J1
(ANA1).
2–3 Disables external analog input from header J1
(ANA1).
User Manual
Table
MC MDS Module Description
11
2.