ABB LST100 Operating Instructions Manual page 13

Ultrasonic level transmitter for upstream oil and gas

Table of Contents

Enlarged version

The Com port properties dialog is displayed:

4. Select the following port settings and click OK.

Bits per second: 9600

Data bits:

Parity:

Odd

Stop bits:

Flow control

None

The Connect To dialog is displayed:

5. Click OK to exit connection configuration and return

to the HyperTerminal window:

IMPORTANT (NOTE)

Step 6 is optional.

6. Click the

icon (properties) on the top toolbar to

display the connection properties dialog. Select the

Settings tab and click ASCII Setup.... Check the Echo

typed characters locally box and click OK, then

click OK again to exit the connection properties dialog.

Any characters typed in HyperTerminal are now echoed

for easier visualization of input.

7. When prompted, input the user name and the password.

The default logon information is:

User name:

LST

Password:

5159

Connection to the LST100 is established and the home

screen of the transmitter is displayed.

LST100 – Ultrasonic level transmitter | OI/LST100-EN 13

Table of Contents