Acorp 4S651M Manual page 44

Chapter 2
SiS On-Chip IDE Devicee: Press Enter to configure the following
submenu:
Internal PCI/IDE
Use this item to choose the ePCI/IDE mode.
The choices: Both; Disabled; Primary; Secondary
IDE Primary Master/Slave PIO
Auto: BIOS will automatically detect the IDE HDD Accessing
mode.
Mode 0~4: Manually set the IDE Accessing mode.
IDE Secondary Master/Slave PIO
Auto: BIOS will automatically detect the IDE HDD Accessing
mode.
Mode 0~4: Manually set the IDE Accessing mode.
Primary Master/Slave Ultra DMA
Auto: BIOS will automatically enable Ultra DMA mode
the IDE HDD Accessing .
Disabled: UDMA mode is disabled
Secondary Master/Slave Ultra DMA
Auto: BIOS will automatically enable the Ultra DMA mode of
the IDE HDD Accessing mode.
Disabled: Ultra DMA disabled.
IDE Burst Mode
Use this item to enable/disable the IDE Burst mode.
4S651M/4S651MN BIOS Setup
2-44
of