Acorp 4S651M Manual page 46

Chapter 2
Onboard Super IO Devicee: Press Enter to configure the following
submenu:
Onboard FDC Controller
The choices: Enabled; Disbled
Onboard Serial Port 1/2
Select an address and corresponding interrupt for the first and
second serial ports.
The Choices: Auto; 3F8/IRQ4; 2F8/IRQ3; 3E8/IRQ4; 2E8/
IRQ3; Disabled.
UART Mode Select
This item allows you to select which Infra Red(IR) function of
the onboard I/O chip you wish to use.
The Choices: Normal; IrDA; SCR; ASKIR
UR2 Duplex Mode
This item allows you to select which Infra Red(IR) function of
the onboard I/O chip you wish to use.
The Choices: Half ; Full.
Onboard Parallel Port
This item allows you to select the onboard parallel port and IRQ.
The Choices: 378/IRQ7; 278/IRQ5; 3BC/IRQ7; Disabled
Parallel Port Mode
The choices are for Parallel Port Mode select:
The choices: SPP; EP;: ECP; ECP+EPP
ECP Mode Use DMA
The Choices: 3; 1.
Game Port Address
The choices are for setting Game Port Address:
201; 209; Disabled
MIDI Port Address
The choices are for setting MIDI Port Address:
300; 330 (default); Disabled.
MIDI Port IRQ
The choices are for setting MIDI Port IRQ:
10 ; 5
4S651M/4S651MN BIOS Setup
2-46