Installing The Appliance; Before Starting; Tools Required - Miele KF 2801 Vi Operating And Installation Instructions

Installing the appliance

Before starting ...
It is essential to read these operating
and installation instructions carefully
before starting to install the appli-
ance.
The refrigeration appliance should be
installed by a suitably qualified in-
staller in accordance with these op-
erating and installation instructions.
Safe operation of the appliance is
only assured if it has been installed
and connected in accordance with
these operating and installation in-
structions.

Risk of damage and injury due to
the refrigeration appliance tipping
over.
This refrigeration appliance is very
heavy and can tip forwards when the
appliance door(s) is (are) open.
Keep the appliance door(s) shut until
the refrigeration appliance has been
built in and secured in its installation
niche in accordance with these oper-
ating and installation instructions.
The appliance is both large and
heavy. Installation must be carried
out by two people.

Tools required

– Cordless drill
– TX 20 screwdriver
– Hammer drill
– Drill bits in various sizes,
depending on materials
– Hammer
– Open spanner
– Ratchet wrench, attachment: socket,
8 mm
– Adhesive tape
– Utility knife
– Pipe wrench
– Spirit level
– Tape measure
– Pencil
Other
– Step ladder
– Sack truck
Installation
27