Initial Commissioning; Before Using For The First Time; Choosing The Right Door Assistant (Push2Open/Pull2Open) - Miele KF 2801 Vi Operating And Installation Instructions

Initial commissioning

Before using for the first time

Allow the refrigeration appliance to
stand for approx. 1 hour before con-
necting it to the power supply.
This will prevent potential functional
problems with the refrigeration appli-
ance.
Packaging material
 Remove all packaging material from
the inside of the appliance.
Always remove all packaging mater-
ial, including adhesive tape, before
switching on the refrigeration appli-
ance. The adhesive tape is difficult to
remove from cold surfaces.
64
Cleaning
Please refer to the relevant instruc-
tions in "Cleaning and care".
 Clean the inside of the appliance and
the accessories.
Choosing the right door assistant
(Push2open/Pull2open)
The door assistant helps you to open
the appliance doors.
You can choose between the two door
assistants
Push2open
„Switching Door assistant
lecting additional settings").
The default door assistant is
 Select the
Pull2open door assistant if your appli-
ance has front panels with handles.
 Select the
Push2open door assistant if your ap-
pliance has front panels without
handles.
and (see
Pull2open
 on" in "Se-
Push2open .