Side-By-Side - Miele KF 2801 Vi Operating And Installation Instructions

Side-by-side

This appliance can be installed side-by-
side with another refrigeration appli-
ance. The following overview will show
you which side-by-side installation op-
tions you have with your refrigeration
appliance.
Depending on the installation situ-
ation, you will need the side-by-side
installation kit for side-by-side installa-
tion (see "Accessories – Optional ac-
cessories").
Instructions for installing refrigeration
appliances side-by-side can be found
in the side-by-side installation kit in-
stallation instructions.
. . . with partition wall
The wall a between the side-by-side
refrigeration appliances must be at
least 16 mm thick.
If the door hinges of the refrigeration
appliances are next to each other,
you must take into account the thick-
ness of the furniture fronts and door
handles so that the appliance doors
do not collide and become damaged
if they are opened at the same time.
The refrigeration appliances are secured
individually in their installation niche us-
ing the supplied installation material.
If the partition wall a is narrower than
160 mm, you will need the side panel
heater from the side-by-side installation
kit to prevent condensation from form-
ing and any resulting damage.
When planning installation niches,
please note that the niche into which
the refrigeration appliance with the
side panel heater is installed must be
4 mm wider (see "Installation –
Building-in dimensions").
If the partition wall a is thicker than
160 mm, you do not need the side-by-
side installation kit, nor the side panel
heater.
Installation
19